Advertisement
･
During standby for recording, the following
operations are enabled:
a ：Switches the compact light on (
(no icon).*
1
(：Switches the vertical shot/horizontal
shot (only when the image size is set to
320 x 240 (QVGA)).*
t ：Switches the in-camera/out-camera.
t (for over a second):
Switches to Still Camera.
*1 You can perform this operation only when
shooting with the out-camera.
Point the camera at the object and o or
2
C
Press o to pause during shooting.
･
. Press o or C, and the
switches to
recording restarts.
･
Recording cannot be paused when Movie
Camera is started from the phonebook, mail
or i-
ppli software.
α
p or C
3
The shutter sound is heard and the recording is
finished. The image confirmation screen is
displayed.
･
If Auto save of Recording Setting is set to Yes,
the shooting screen reappears after saving the
video shot. The operations from Step 4 are not
needed.
･
If the size of video file reaches the limit while
recording, recording is stopped and the video
recorded up to that point is saved.
If p is pressed to end the recording while in
･
pause, the video recorded up to that point is
saved.
4
View and confirm the video shot
･
To save the video immediately: Go to Step 5
･
To retake another video without saving the shot
video: c
To play the video: p
･
･
When Auto Play in Recording Setting is set to
Yes, the recorded video is played automatically.
Note: The miniSD memory card is not included in the bundle and needs to be purchased. ☛P331
182
)/off
1
The shutter sound is
heard and recording is
started.
appears at
the lower part of the
screen.
Sending via mail: a
■
A confirmation screen is displayed asking
whether to save the recorded video. Select Yes
to save the recorded video in FOMA terminal,
and the mail composition screen is displayed.
･
Even when the memory to save is set to the
miniSD memory card, the video is saved to
FOMA terminal.
･
If the file size of the recorded video exceeds
500 Kbytes, the video cannot be attached.
･
When the image size is set to 320 x 240
(QVGA), the video cannot be attached.
･
When the quality of video is set to
HQ+(highest quality), the video cannot be
attached.
■
Setting the video for the standby display:
m21
z
Select Yes
The recorded video is saved to FOMA
terminal and set for the standby display.
･
If zooming is available for the shot video,
select Yes (Same size) to maintain the image
size or select Yes (Large size) to enlarge it to
the screen size.
･
If the i-
ppli standby display has been set, a
α
confirmation screen asking whether or not
to cancel it is displayed continuously.
･
When the memory to save is set to the
miniSD memory card, the image cannot be
set for the standby display.
■
Adding the video to phonebook entries:
m2
z
2 or 3
The recorded video is saved to FOMA
terminal and the phonebook registration
screen is displayed.
･
To update saved entries, select the party to
add the video.
･
Videos can be added to the phonebook
entry only when the image size is set to 128
x 96 (Sub-QCIF) or 176 x 144 (QCIF) and
the recording type is set to Video only.
･
When the memory to save is set to the
miniSD memory card, the video cannot be
added to the phonebook entry.
Changing the title: m31
■
the title (up to 31 one-byte or two-byte
characters) zp
･
The changed title will be valid after the video
is saved.
z
Select Yes
z
Enter
Advertisement
Chapters
