2
Perform the following operations
Item
Operation procedure
a 1
z
Guidance
b 1 or 2
setting
Japanese:
Sets the guidance for you to hear at
the time of calling to Japanese.
English:
Sets the guidance for you to hear at
the time of calling to English.
c Select Yes
Japanese:
Sets the guidance for the other
party to hear at the time of receiving
to Japanese.
Japanese+English:
Sets the guidance for the other
party to hear at the time of receiving
to Japanese followed by English.
English+Japanese:
Sets the guidance for the other
party to hear at the time of receiving
to English followed by Japanese.
2
z
Check setting
Select Yes
Using Service Dialing Number
Calls are made to the DoCoMo for Repairs or the
DoCoMo for General Inquiries.
・
The item numbers for the DoCoMo for Repairs
and DoCoMo for General Inquiries may differ or
not appear depending on the UIM types. ☛P40
m8997
1
2
Perform the following operations
Item
1
z
ドコモ故障問合せ
(DoCoMo for
A call is made to the DoCoMo for
Repairs)
Repairs.
2
z
ドコモ総合案内・
受付
(DoCoMo for
A call is made to the DoCoMo
General Inquiries)
Information Center.
396
Select Yes
z
1 to 3
Service Dialing Number
Operation procedure
Select Yes
Select Yes
Setting actions to receive incoming calls
during a call
During a voice call or 64K data communication,
you can use Voice Mail Service or Call
Forwarding Service, etc. to handle an incoming
call.
m89
1
2
Perform the following operations
Item
Operation procedure
Arrival call act
Set how incoming calls are handled while
talking.
Default
8
z
1 to 4
Answer
Answer:
You can respond an incoming call
received during a call or 64K data
communication, or forward it to the
Voice Mail Service Center or to the
forwarding destination registered in
Call Forwarding Service.
Voice Mail:
Incoming calls received during a call or
64K data communication are handled
by Voice Mail Service.
Call Forwarding:
Incoming calls received during a call or
64K data communication are
forwarded.
Call Rejection:
Incoming calls received during a call or
64K data communication are rejected.
Activate the response method selected by
Set arrival act;
Activate
Arrival call act.
71
z
72
z
Set arrival act;
Deactivate
73
z
Set arrival act;
Check setting
INFORMATION
Even if Arrival call act is set to any of the above, calls will
●
be recorded in the received call history.
Setting Remote Control
You can access such services as Voice Mail
Service and Call Forwarding Service from touch-
tone general subscriber phones, payphones, or
DoCoMo mobile phones.
Select Yes
Select Yes
Select Yes
Remote Control