Advertisement
Total videophone calls：
The total duration of videophone calls made
Total data sessions：
The total duration of data communication
established
Reset:day&time(Voice)：
The last date and time when Total voice calls
was reset
Reset:day&time(VP)：
The last date and time when Total
videophone calls was reset
Reset:day&time(Data)：
The last date and time when Total data
sessions was reset
■
Resetting the total calls duration:
a Press p on Call Duration screen
Enter the terminal security code
b 1 to 4
z
To return to the call duration screen: p
･
Checking the call cost
Press m8441
1
･
If the total cost of calls was reset in the past,
the cost of the total calls made up to the
present after the reset is displayed.
Last call cost: Voice：
The cost of the last voice call
Last call cost: VP：
The cost of the last videophone call
Last call cost: Data：
The cost of the last data communication
Total calls cost：
The total cost of voice/videophone call and
data communication
Reset: day & time：
The last date and time when Total calls cost
was reset
Resetting the total call cost: p on Call
■
z
Cost screen
Enter PIN2 code
Yes
INFORMATION
The fee for sending Chaku-moji is not included.
●
No last charge information appears as "＊＊＊＊＊＊ YEN".
●
When you switch from the voice call to the videophone
●
during a call, the last call cost shows the total amount of
them. During the operation to switch, no call cost is
required.
When the last or total duration of voice/videophone call
●
or data communication exceeds 9,999 hours 59 minutes
59 seconds, counting is restarted from 0 second.
382
z
Select Yes
z
Select
When FOMA terminal is turned off, the last call duration
●
is stored, but the last call cost is displayed as "＊＊＊＊＊＊
YEN".
The duration of receiving a call and ringing time cannot
●
be counted.
The call duration and call cost is not counted for i-mode
●
communication, packet communication, and PushTalk
communication. For details of those usage fees, see
"i-mode User's Manual" you received when you
subscribed to i-mode.
Resetting the call cost automatically
Total call cost is set to zero automatically on the
1st day of each month.
Default OFF
m8444
1
2
Enter the terminal security code
To cancel: 2
･
3
Enter the PIN2 code
INFORMATION
Even if the setting is ON, the setting is canceled when
●
the UIM different from the one used during the setting is
inserted and then turn the power on. It doesn't return to
the previous setting even if the UIM used when setting it
is inserted again.
When the setting is ON, the call cost will be reset if you
●
change the date and time to the next month in Date and
Time Setting.
When the setting is ON, if the terminal is not turned on or
●
if you talking on the terminal at 0 o'clock of the first day of
the month, a reset will take place when you turn the
power on or end the call.
If the setting is ON, the PIN2 code is required when you
●
turn the power on.
Reset Call Cost
z
1
Advertisement
Chapters
