Advertisement

Quick Links

α

Advertisement

Table of Contents
loading

Summary of Contents for Foma D905i

  • Page 1 α...
  • Page 2 You also may not be able to use your FOMA terminal on the upper floors of some highrise building, even though there is nothing around you that interferes with the signal.
  • Page 3 FOMA terminal overseas. Use it by separating from this instruction manual. ● In the manual for FOMA D905i, the FOMA D905i is usually referred to as “FOMA terminal”. ● This manual explains functions performed with a microSD memory card. A microSD memory card is required separately.
  • Page 4: In This Manual, The Operation Procedures Are Described As Follows

    How to use and refer to this manual Shown below is an example when you search for the page where “My Picture” is described. Searching on Index Use the index if you have already known a function or service name..
  • Page 5: Description

    You can display images saved in My Picture in You can change the order of data of the list screen. listed on the index. ・ Data Box of the FOMA terminal. To sort music data in Music P372 Default By: Saved date & time...
  • Page 6: Easy Search

    Easy Search Use this Easy Search to search for a function using easy-to-understand words. Useful functions for Notify/not notify your phone number....48 Caller ID Notification phone calls Put the current call on hold........53 On-hold Switch to videophone call during voice call ..55 Switch to videophone Adjust the volume of the other party’s voice..
  • Page 7 FM Radio Use your phone as an alarm clock ....387 Alarm Clock Use your phone as a calculator......403 Calculator Use your FOMA phone overseas ...... 438 Overseas use Update software ..........487 Software Update Update the security ........... 492 Virus Scan Function ●...
  • Page 8: Table Of Contents

    Before using your FOMA terminal ..... Inside front cover For first time user of the FOMA terminal ... Inside front cover How to use and refer to this manual........1 Easy Search ................4 Contents Features and functions of FOMA D905i ......8 Making full use of D905i ............10...
  • Page 9: Easy Search/Contents/Precautions

    C o n t e n t s i-αppli ppli Downloading Starting i- ppli i- ppli Standby Display etc. α α α Osaifu-Keitai/ToruCa Osaifu-Keitai iC transfer service Starting Osaifu-Keitai compatible i- ppli ToruCa α Obtaining ToruCa Displaying ToruCa IC Card Lock etc. GPS Function GPS Position Location Navigation GPS-compatible i- ppli Location Request...
  • Page 10 Features and functions of FOMA D905i Consideration Easy Search/Contents/Precautions...
  • Page 11 Consideration Easy Search/Contents/Precautions...
  • Page 12 Making full use of D905i A variety of functions of D905i visual communications are explained here. Consideration Easy Search/Contents/Precautions...
  • Page 13 Consideration Easy Search/Contents/Precautions...
  • Page 14 ..........P13 property damage. Handling the FOMA terminal .....P14 Handling the battery pack ......P15 Handling optional devices (AC adapter/DC adapter/Desktop Holder/In-Car Holder) ..P16 Handling the UIM (FOMA card)....P17 Handling the FOMA terminal in the vicinity of medical devices........P17 Easy Search/Contents/Precautions...
  • Page 15: Caution

    Do not place the battery pack, Handling the FOMA terminal, battery pack, adapter FOMA terminal, adapter (and (and charger) and the UIM (general information) charger) or UIM in the microwave oven, high-pressure cooker or other cooking appliances. DANGER Doing so could cause the battery pack...
  • Page 16: Handling The Foma Terminal

    If you have done prohibition acts such as If the air bag inflates, the FOMA terminal using the FOMA terminal inside an aircraft, may hit you and injury and damage to you may be punished as stipulated by law.
  • Page 17: Handling The Battery Pack

    Doing so could cause the battery pack could cause unsafe driving. Do not use to leak, overheat, rupture or catch fire. the FOMA terminal in such a case. Do not pierce the battery pack Do not bring magnetic cards with nails, hammer on it or step near the FOMA terminal.
  • Page 18: Handling Optional Devices (Ac Adapter/Dc Adapter/Desktop Holder/In-Car Holder)

    Use adhesive tape to cover the terminal or equipment failure. When using the of battery pack when it is no longer used FOMA terminal overseas, use the AC and bring it to a DoCoMo Shop after the adapter that can be used overseas.
  • Page 19: Handling The Uim (Foma Card)

    During charging, place the Handling the FOMA terminal in the vicinity of adapter (and charger) and medical devices Desktop Holder in a stable location. Do not cover or wrap The information given below conforms to the guidelines the adapter (and charger) and...
  • Page 20 Use in an environment with a temperature of 5 to 35 ° C and relative humidity of 45 to 85 %. General ● If the FOMA terminal is used near a radio, television or general subscriber phone, it could ● Do not get the components wet.
  • Page 21 Adapter (and charger) Camera ● Recharge the battery pack in a location where the If you should use the FOMA terminal to make a ambient temperature is between 5 ° C and 35 ° C. public nuisance, you might be punished under ●...
  • Page 22 ® ・ This product contains Flash Lite of Adobe the FOMA logo, the i-mode logo, the i- ppli logo, the α Systems Incorporated. WORLD WING logo, the DCMX logo, and the iD logo Adobe, Flash and Flash Lite are trademarks or...
  • Page 23 ・ NetFront of ACCESS CO., LTD is installed in this Picsel, Picsel File Viewer and the Picsel cube logo product to provide Internet functionality. are trademarks or registered trademarks of Picsel NetFront is a trademark or registered trademark of Technologies Ltd. ・...
  • Page 24 Data Communication” and “Kuten Code List” is contained. Stereo earphone (including the instruction manual) (sample) Optional accessories FOMA AC Adapter 01/02 Desktop Holder D15 Battery Pack D10 (including the written (including the instruction (including the warranty and the instruction manual)
  • Page 25 Before Using the Handset Names and functions of parts .................24 Reading the display ..................28 Selecting the menu ...................31 Using the UIM (FOMA card) ................36 Attaching/removing the battery pack .............39 Charging the FOMA terminal ................40 Checking the remaining battery level ........
  • Page 26: Description

    Back cover ・ Using the Earphone Plug Adapter P001 (optional) allows you to use an existing earphone/microphone. Charging terminals Used to charge the FOMA terminal in the Desktop Holder (optional). Before Using the Handset...
  • Page 27 ■ Performs Check i-mode Message. charging. f fPower/End key *2 The typestyle of key characters is different ● Ends calls or functions in operation. depending on the color of the FOMA terminal. ● Holds incoming calls. ● Cancels Secret Mode. ●...
  • Page 28 Opening/closing the FOMA terminal To open the FOMA terminal, slide the front face (with the display) upward. To close it, slide the front face downward. ・ Operations such as accessing the reply mail screen or the edit schedule or note screen are made easily by opening the FOMA terminal.
  • Page 29 INFORMATION In the following cases, no operation is performed by rotating the Speed Selector but pressing % or & is enabled: ● ・ ・ Displaying sites by shortcuts on the dial input screen Using Calculator ・ ・ Moving the cursor, frame (for changing size or clipping) or stamp while editing still image The display is off Setting the Speed Selector Speed Selector Setting...
  • Page 30: Description

    Reading the display The description of icons displayed at the top or the bottom of the display is shown below: Unread SMS exists (blue/red) Unread Message R exists/fills storage space* (green/red) T.B.D Unread Message F exists/fills storage space* Accessing the phonebook on the :...
  • Page 31: My Picture

    The MTP mode is set with/without Alarm Clock is set ☛P387 microSD memory card inserted Schedule alarm is set ☛P390 Connecting to external device via the FOMA USB Cable (optional) ☛P88, Alarm Clock and schedule alarm are P345 set simultaneously Software Update reserved ☛P491 Status of USB Mode Setting and microSD memory card ☛P345...
  • Page 32: Settings

    The FOMA terminal display is manufactured by taking advantage of highly advanced technology but some dots may be always or never lit. ・ When the battery pack is removed from the FOMA terminal with the power turned on, residual images may remain for some time. Remove the battery pack with the power turned off. ・...
  • Page 33: Selecting The Menu

    Selecting the menu There are three types of the menu: normal menu, custom menu and Speed Menu. The normal menu is a standard menu that appears when you press m. The custom menu is your original menu created by adding menu items. Speed Menu can be displayed by pressing t.
  • Page 34 ・ ushTalk. You can register them in different groups. gistered (or fewer depending on the type of data registered). registered in the FOMA terminal phonebook in advance to be registered in the Before Using the Handset...
  • Page 35: Description

    Selecting menu items with the Speed Selector Example Executing Phonebook new entry from the normal menu (Type5 of animation menu) Highlight Phonebook & Logs To return to the previous screen: c ・ To return to the standby display: f ・ In case of the animation menu, the operations of O differ depending on the ・...
  • Page 36 Selecting items on the screen Selecting an item from the pulldown menu o to display the pulldown menu % to highlight an item Highlight an item ・ You can select an item by the dial key for the item number. Pulldown menu Selecting an item from the check box Highlight a check box...
  • Page 37 : Update notification icon ☛P489 : (succeeded/failed) Auto-update result of the latest pattern definition exists ☛P493 : Being connected to external device via the FOMA USB Cable (optional) ☛P345 INFORMATION When you highlight an icon and hold down c for over a second, the icon temporarily disappears from the screen. It ●...
  • Page 38 For details on handling the UIM, refer to the UIM manual. Inserting/removing the UIM Use your FOMA terminal with the UIM inserted. If the UIM is not inserted in your FOMA terminal, first insert it. ・ Turn the power off before inserting or removing the UIM.
  • Page 39: I-Motion

    UIM security codes The PIN1 and PIN2 codes are used for the UIM. Both codes are set to “0000” at the time of subscription to the FOMA service. You can change this to any code (4 to 8 digits). ☛P156 UIM operation restriction function The FOMA terminal is provided with the UIM operation restriction function for protecting your data and files.
  • Page 40 UIM (green/white) and a terminal compatible with WORLD WING. Note that the D905i terminal can be used only in a DoCoMo 3G roaming service area. In a GSM service area, insert the UIM into a GSM-compatible terminal to use it.
  • Page 41: Settings

    ● may remain for a while when the battery pack is attached or removed. This is not a fault of the FOMA terminal. When you remove the battery pack, reservation of software update may be canceled. If you set Adjust time/time diff to ●...
  • Page 42 ■ When charging is started The Enter key lights in red. When the power of the FOMA terminal is turned on, the charge alert sounds and the battery level icon blinks. Status Icon (...
  • Page 43 The FOMA terminal uses power after charging is completed until the terminal is unplugged from the adapter. In such a case, the AC adapter or DC adapter charges again but if the FOMA terminal is removed in the middle of charging, the following could occur: ・...
  • Page 44 How to charge Use the FOMA AC Adapter 01/02 (optional) to charge the battery. It can also be used with the Desktop Holder D13 (optional). ・ The battery pack can only be charged when it is attached to the FOMA terminal.
  • Page 45 Charging in a car Use the FOMA DC Adapter 01/02 (optional) to charge the battery in a car. It can be used in negative ground cars (both 12 V and 24 V). ・ For details, refer to the DC adapter manual.
  • Page 46 When the battery almost runs down during a call, even if OFF is set, the low battery alert sounds from the earpiece. ● Turning the power on/off Power ON/OFF When you turn on the power of the FOMA terminal for the first time, perform initial settings. ☛P45 ・ Turning the power on f (for over 2 seconds) The wake-up screen appears and then the standby display.
  • Page 47: Security Code

    INFORMATION When you turn on the FOMA terminal after replacing the UIM (except when Omakase Lock (Remote Lock) is set), entry of the ● 4 to 8-digit terminal security code is required. After entering the correct terminal security code, the standby display appears.
  • Page 48 Date, Time ・ The date can be set from January 1, 2000 to December 31, 2050. :Select the area (time zone) to set on the FOMA terminal. In Japan, set this to Time zone GMT+09:00. :Set the summer time. When ON is set, your terminal’s clock advances 1 hour from the Summer time actual time.
  • Page 49 ・ When no UIM is inserted or the FOMA terminal is out of the service area, the automatic time correction is not performed even if you turn the power off and then on.
  • Page 50: Menu

    Notifying your phone number to the other party Caller ID Notification Set the FOMA terminal to send your phone number (caller ID) to be displayed on the other party’s phone every time you make a call. ・ The caller ID is your important information. Carefully consider whether to send your caller ID.
  • Page 51: Voice/Videophone Calls

    Switching a received call between a voice call and videophone call ..68 Enabling use of dial keys to answer a call ...... Any Key Answer Setting to start talking by opening the FOMA terminal ..Open Answer Setting to disconnect/continue/hold a call by closing the FOMA terminal ....................
  • Page 52 Videophone The videophone function is available between terminals that support DoCoMo’s videophone. By using the videophone, you can talk on the phone while looking each other’s images. It is also possible to display a still image, substitute image, Chara-den, etc. instead of your self image. Chara-den ☛P328 ・...
  • Page 53 Making voice/videophone calls Enter the phone number ・ When calling general subscriber phones, always include the area code, even from the same city. ・ Up to 80 digits can be entered. However, only 24 digits are displayed. To correct the phone number: c ・...
  • Page 54: Description

    INFORMATION [Common] If you hear a guidance requesting your caller ID when making a call, call again after setting the FOMA terminal to send ● caller ID. ☛P48 When you have subscribed to the Multi Number service, you can call after selecting a registered multi-number. ☛P428 ●...
  • Page 55: Pushtalk

    If a call is hard to hear with a large amount of noise around you or the other party, turn off the speakerphone function. ● Talk to the FOMA terminal within about 30 cm. ● The speakerphone function can be used even when Silent Mode is on.
  • Page 56 Transmitting tone signals (DTMF) Send DTMF ・ You can input tone signals (DTMF) during a videophone call while sending your self image ( ), the camera-off image ( ) or Chara-den ( Example During a videophone call m9 during a videophone call Enter with dial keys The entered number appears on the screen and the tone signals (DTMF) are transmitted.
  • Page 57 INFORMATION Tone signals (DTMF) may not be received depending on the receiving device. ● You cannot make a call to another party by putting the current call on hold and entering a pause (P) or timed pause (T). ● Switching between a voice call and videophone call You can switch between a voice call and a videophone call by operating from the submenu during a call when the other party’s terminal can switch calls.
  • Page 58: Phonebook

    Using Redial/Received Calls Redial/Received Calls The FOMA terminal records voice calls, videophone calls and PushTalk calls that you made in Redial and those you received in Received Calls. With Received Calls, you can also check unanswered calls (missed calls) and recorded messages.
  • Page 59: Security Code

    ■ Registering a group in the PushTalk phonebook: Highlight a call Enter a group name The parties of a PushTalk call with multiple parties can be registered as a group if registered in the PushTalk phonebook. ■ Deleting redials/received calls: ・...
  • Page 60 *1 Displayed when registered in the phonebook (not displayed during Personal Data Lock or while not in Secret Mode for a phonebook entry with Secret Attribute). *2 May not be displayed when the time zone of the FOMA terminal is set to GMT+09:00. *3 Displayed in the dual mode of 2in1.
  • Page 61 *7 The first member’s name is displayed when you made a PushTalk call to multiple parties without using group calling. *8 Displayed when registered in the phonebook, according to the setting of View Preference. *9 For redial, displayed for a call made using Call Option. Setting Chaku-moji Chaku-moji When you make a voice or videophone call, you can set a message (Chaku-moji) to be displayed on the...
  • Page 62 When a call with Chaku-moji is received within the delay time set in Mute Ring Time Setting, the Chaku-moji is displayed ● and is recorded in the received call history. In this case, the sender is charged for the transmission. You cannot send or receive Chaku-moji when using the FOMA terminal overseas. ● Voice/Videophone Calls...
  • Page 63 Showing/hiding your caller ID for each call 186/184 Call Prefix a specific number to the beginning of the phone number when you make a call. ・ The caller ID is your important information. Carefully consider whether to send your caller ID. ・...
  • Page 64 For the countries and overseas carriers you can connect to, visit the DoCoMo International Services wedsite. ・ The image of the other party displayed on the FOMA terminal may be distorted or connection may not be established depending on the terminal at the other end of the international videophone line.
  • Page 65 Setting for international calls Int’l Call Assist You can set whether to make an international call by replacing “+” which was entered at the beginning of a phone number with the international access code set in this setting, and whether to make a call from overseas by adding the country code.
  • Page 66 Using “+” to make an international call When you enter “+” at the beginning of a phone number for dialing, a confirmation screen appears asking whether to replace “+” with the international access code according to Int’l Call Assist. ・ This operation is valid when Intn’l prefix of Int’l Call Assist is set to ON.
  • Page 67 Making a call by specifying a sub-address Enter the phone number Enter the sub-address ・ You can also enter “ ” at the beginning of the phone number to connect to V-live or other numbers. n (voice call) or t (videophone call) ・...
  • Page 68 The operation during incoming calls when Answer Machine is set follows the Answer Machine settings. ● If the setting is made to play sounds from a handsfree device, the call continues even if the FOMA terminal is closed, ● regardless of Close Setting.
  • Page 69: Description

    The caller’s information such as phone number, name, image and video/i-motion will be displayed on the screen according to the dialing condition of the caller and your FOMA terminal settings. You can set the FOMA terminal not to display the name or phone number. ☛P164 ■...
  • Page 70 INFORMATION When a call forwarded from a FOMA terminal arrives, the phone number from which it was forwarded is displayed if it is ● not registered in the phonebook. If it is registered, the name is displayed. However, the phone number or name may not be displayed depending on the forwarding source.
  • Page 71: Camera

    This function is available for voice calls and PushTalk calls. However, it is unavailable when receiving a call while talking. Default ON m853 1 or 2 Setting to start talking by opening the FOMA terminal Open Answer ・ This function is available only for voice calls (available even while Key Lock is on). Default OFF...
  • Page 72 When you close the FOMA terminal while recording a message, the recording continues regardless of this setting. ● This setting applies when you close the FOMA terminal while recording a talking voice memo or video memo. When On ● hold is set, the contents recorded just before putting a call on hold are saved.
  • Page 73: Mail

    Adjusting the volume of ring alerts while receiving a call Ring Alert Volume ・ The volume can be adjusted in 7 levels, from silent to level 1 to level 6 (the volume of Movie ringtone can also be adjusted in 7 levels). ・...
  • Page 74 Putting incoming calls on hold when you cannot answer right away Response and Hold ・ Callers are charged for the time spent on hold. f while receiving a call The incoming call is put on hold (Response and Hold). The other party hears the response hold guidance.
  • Page 75 Setting the response hold guidance Status Message You can record your own voice as response hold guidance. ・ One guidance of up to about 10 seconds long can be recorded. ・ While a voice call or videophone call is during Response and Hold, the guidance set by this function is played.
  • Page 76 ■ ■ When Public mode (Driving mode) is activated No ring alert plays when your FOMA terminal receives a call. (with the number of missed calls) appears on the standby display and the call is recorded in the received call history.
  • Page 77 Public mode (power off) is an automatic answering service considering etiquettes in highly public places. When Public mode (power off) is set and then a call is received with the FOMA terminal switched off, a guidance is played and informs the caller that the called party is in an area (hospital, airplane, priority seat area on a train, etc) where the phone should be turned off and cannot answer the call.
  • Page 78 It is advisable that the contents of recorded messages be separately written down in a notebook, etc. Recorded data may be lost due to failure, repair, change of model or other handlings of the FOMA terminal. If the data should be erased, DoCoMo assumes no responsibility for the loss of any data.
  • Page 79 When the recording is completed, the call is disconnected (with the number of recorded messages) appears on the standby display. INFORMATION When the FOMA terminal is turned off or outside the service area, Answer Machine does not operate. Use Voice Mail ● Service (pay service).
  • Page 80 Menu 4713 Setting the response time until the greeting starts Response Time Setting Default 13 Sec. Enter the response time (0 to 120 seconds) To increase or decrease the time: % ・ INFORMATION When Auto Answer, Voice Mail Service or Call Forwarding Service and this function are set simultaneously, the priority ●...
  • Page 81: Security Code

    Menu 472 Playing recorded messages You can play or delete recorded messages from the list. Unplayed recorded messages, if any, can be played quickly from the standby display. ☛P35 ・ On the recorded message list screen, the recording date and time and the caller’s phone number appear.
  • Page 82 Using Chara-den A character can be sent instead of your image when making a videophone call. m321 during a call Select a folder Select a Chara-den image ・ If you press dial keys while sending Chara-den as the substitute image, the character performs the action corresponding to the key pressed.
  • Page 83 Setting the quality of outgoing and incoming images ・ Setting Prefer motion spd makes motions smoother in a little lower-definition image. ・ Setting Prefer img qual makes motions a little slower in a higher-definition image. Default Normal m7 during a call 1 or 2 1 - 3 Setting a frame on the outgoing images...
  • Page 84 This setting is not available while a frame is being sent. ☛P81 ・ ・ Only the still image that is 176 x 144 or smaller and is permitted to output from the FOMA terminal can be set. m3 during a call...
  • Page 85 Switching display magnifications Zoom ・ This setting is available only while your self image is being sent. Default normal ( & during a call Each press of r switches the magnification of image as follows. Press l to switch in the reverse ・...
  • Page 86 Turning the compact light on ・ You can switch the compact light on only while the out-camera is used. ・ The compact light may go out temporarily when you perform some setting operations while talking. m5 during a call The compact light is turned on. If the light has been turned on, it goes out. ・...
  • Page 87 ● voice sounds from the connected earphone/microphone regardless of the setting of Speakerphone. If a videophone call is made to emergency calls (110, 119 or 118) from the FOMA terminal when Auto redial as voice is ● set to ON, the call is automatically switched to a voice call.
  • Page 88 Still image with a size larger than 176 x 144 Still image in the format other than JPEG and GIF ・ ・ Animation and Created animation Image not permitted to output from the FOMA terminal Setting the substitute image Default Default Chara-den Example Setting the default Chara-den...
  • Page 89 INFORMATION If the Chara-den set as the substitute image is deleted, the substitute image is reset to Default Chara-den. If you delete ● the still image or the default Chara-den that has been set, the substitute image is reset to Default image. Setting of switching between a voice call and videophone call Notify Switchable Mode Set whether to notify the other party’s terminal that your terminal can switch between a voice call and a...
  • Page 90 Using the videophone by connecting to an external device External Device By connecting the FOMA terminal to an external device such as PC by the FOMA USB Cable (optional), you can make and receive videophone calls from the external device.
  • Page 91: Security Code

    Perform remote control operation with the infrared keitai datalink. If you set ON, it eliminates the need to enter the authentication data port of the FOMA terminal pointed at the infrared password every time. receiver of the supported device used (operating ・...
  • Page 92: Security Code

    ・ ・ To send all the data, the same authentication Depending on the other party’s FOMA terminal, it password must be entered both by the sender may be difficult to send or receive data. Try and receiver. Decide a 4-digit authentication adjusting the distance between the Felica marks password from 0000 to 9999 in advance.
  • Page 93 ■ Single recording time (D905i terminal) Show the standby display on the receiver The estimated maximum time for a single side and overlap the FeliCa marks of the recording that can be saved in D905i is as shown FOMA terminals below: File size restrictions...
  • Page 94 Setting FM Transmitter frequency the antenna, and surrounding circumstances. In this case, FM Transmitter Setting change the direction of your FOMA terminal so that you can receive better sound. Note, however, that this may ・ Set a different frequency than those used for FM sometimes fail to remove the noise or interrupted sound.
  • Page 95: Description

    ・ If you changed the setting to AUTO while in Japan, turn the FOMA terminal off and then turn it back on. ● When you move from the first overseas destination to another...
  • Page 96 Declaration of Conformity FCC RF Exposure Information The product “FOMA D905i” is declared to conform with the essential requirements of Your handset is a radio transmitter and receiver. European Union Directive 1999/5/EC Radio It is designed and manufactured not to exceed...
  • Page 97 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

Table of Contents