Advertisement
m2 during a call
1
■
Adjusting brightness and color density:
Adjusting flicker: 3
■
Sending the still image/camera-off image
Select a still image or the image displayed as Camera off (camera-off image).
This setting is not available while a frame is being sent. ☛P86
･
･
Only the still image that is 176 x 144 or smaller and is permitted to be output from FOMA terminal can be
set.
m3 during a call
1
Sending the camera-off image: 3
■
･
When the camera-off image is set, the substitute image set in Image Setting is sent.
However, if Chara-den is set as the substitute image, the default image (camera-off image) is sent.
■
Sending a still image:
Switching display magnifications
･
Available only while your self image is being sent.
Default normal (
)
Press % during a call
1
Each press of u switches the magnification of image as follows. Press d to switch in the reverse
･
order.
In-camera : normal (
Out-camera: normal (
→ 10x (
INFORMATION
Zooming will be canceled if you switch between the in-camera and out-camera.
●
88
z
Select an item
a 2
z
Highlight Brightness slider
b d to highlight Density slider
･
Your self image is displayed on the main screen while adjusting. You
can check the change of brightness or color density as you shift the
slider's position.
･
If you do nothing on the terminal for some time after changing the
slider's position, the settings are not changed and the talking screen
reappears.
z
1 to 3
z
Select an item
a 4
z
Select a folder
b Select a still image
･
To view a still image: Highlight a still image
To send the previous image: o while sending a still image
･
) → 2x (
)
) → 2x (
) → 4x (
) → 6x (
) → 12x (
) → 16x (
)
z
&
z
&
z
p
z
p
) → 8x (
)
Zoom
Advertisement
Chapters
