Advertisement
Changing i-channel settings
You can set whether to run tickers of received
i-channel information on the standby display. You
can also set the ticker running speed.
･
When Show ticker is set to Yes, up to 10 tickers for
the newest information are shown on the standby
display each time the display appears until the
display items disappear. When Show ticker is set to
No, no tickers are displayed.
･
In the default state or when the UIM is replaced, or
when the host address 2 is changed, if the
i-channel information is automatically updated or if
you press c to display the channel list, the
ticker is displayed and you can set the ticker
setting.
Default Show ticker: Yes Ticker speed: Normal
d72
1
2
Select each item to set
Show ticker：
Select Yes or No.
･
If No is selected, Ticker speed cannot be
set.
Ticker speed：
Select from Slow, Normal, or Fast.
Press p
3
･
If Show ticker is set to Yes, a confirmation
screen appears when video/i-motion, Chara-
den or i-
ppli is set on the standby display. If
α
you select Yes, video/i-motion, Chara-den or
i-
ppli is released.
α
INFORMATION
In the following cases, i-channel information cannot be
●
displayed in the ticker.
･
In All Lock
･
In Omakase Lock (Remote Lock)
･
In Public mode (Driving mode)
･
When UIM not inserted
292
Menu 272 / Menu 8215
Ticker Setting
･
In PIM Lock
Advertisement
Chapters
