/
Ring alert
Vibrate alert :Select Select to set the vibrator for incoming calls/mails.
/
Light alert :Select Select to set the lighting pattern of the Enter key for incoming calls/mails.
/
Light color :Select Select to set the lighting color of the Enter key for incoming calls/mails.
/
Substitute image (Only the screen for calls can be set) :
Press p
3
INFORMATION
When you set Sync melody for Incoming vibrator or lighting pattern, operation may not occur depending on the melody.
●
Registering entries into the UIM phonebook
Maximum number of items that can be registered ☛P106
・
m43
1
2
Enter the name (up to 21 one-byte or 10 two-byte characters)
3
Select each item to set
Name and reading
Name
:Check the name
110
:Select Movie ringtone or Melody to select a video/i-motion file or a melody.
・
Only video/i-motion with the ring alert setting of the detail information specified to
Available can be set as ring alert.
・
To operate as set in the setting for Sound Setting, select Terminal setting.
・
To operate as set in the setting for Vibrator Setting, select Terminal setting.
・
If Sync melody or OFF is set, the lighting color cannot be set.
・
To operate as set in Light Alert Setting, select Terminal setting.
・
To operate as set in Light Alert Setting, select Terminal setting.
Select Select to set Chara-den (☛P327) displayed during a call.
・
To operate as set in Image Setting, select Terminal setting.
・
Kanji, hiragana, katakana, alphabetic and numeric characters, symbols and
pictograms can be entered. However, symbols and pictograms may not appear
correctly if transferred by infrared communication, etc.
・
When both one- and two-byte characters or one-byte katakana are used, up to
10 characters can be registered.
・
If a name is not entered, the entry cannot be registered.
■
Correcting the name: Select the name field
UIM Phonebook New Entry
z
p
z
z
p
Correct the name