Advertisement
■
Setting for the Speed Selector:
a Select Lighting field
･
When OFF is set, Turning light pattern cannot be set.
b Select Turning light pattern field
Press & to switch the pages.
･
･
The Enter key lights/flashes in the highlighted color.
Press p
4
■ Priority of lighting
In case the lighting is set in multiple functions, the Enter key lights/flashes by priorities given below:
a Alert by Contact of the FOMA terminal phonebook
b Alert/Image by Group of the FOMA terminal phonebook
c Light Alert Setting
･
The lighting for incoming PushTalk calls conforms to the setting of Light Alert Setting.
INFORMATION
The color names are for information purpose only.
●
When Sync melody is set for the lighting pattern, the Enter key may not light/flash depending on the melodies.
●
Even when IC card is set to ON, the Enter key may not light while Osaifu-Keitai compatible i-
●
Even when IC card is set to ON, if the power is turned off, the Enter key does not light.
●
When IC card is set to ON, the Enter key flashes when holding up the FeliCa mark to the reader/writer. The Enter key also
●
flashes when the FeliCa mark is held over the reader/writer in which Osaifu-Keitai compatible i-
Even when Speed selector is set to ON, lighting/flashing by rotating the Speed Selector is unavailable while the Enter key
●
is lighting/flashing (except during a call).
Flashing the Enter key when receiving new information
The Enter key flashes when there is new information such as missed calls, unread mails, etc.
Default OFF
m826
1
Press 1
2
To cancel the setting: 2
･
INFORMATION
Even when ON is set, the Enter key does not flash in the following cases:
●
･
While receiving a call
･
During All Lock
･
While the Enter key is lighting (excluding the following cases where the Enter key is lighting when opening/closing
FOMA terminal, rotating the Speed Selector or charging)
Even when ON is set, if there is no new information for about 6 hours since the first arrival of new information or if
●
or
(with the number of information items) on the standby display is cleared, the Enter key stops flashing
even if the information has not been confirmed.
When ON is set, the Enter key flashes at about 6 second intervals in the lighting color set in each of the following
●
settings. It does not conform to the setting of Alert by Contact or Alert/Image by Group. If the newly arrived information
is confirmed, it stops flashing.
･
Missed calls (voice call/videophone call/PushTalk call/recorded message): Incoming call in Light Alert Setting
･
Unread information (mail/chat mail/SMS): Incoming Mail in Light Alert Setting
･
Unread information (Message R/Message F): Incoming Message R/Incoming Message F in Light Alert Setting
z
1 or 2
z
1 to 9, 0, ( or #
･
While talking
･
While activating Camera/Movie Camera/Sound Recorder
ppli is activated.
α
α
･
In Public mode (Driving mode)
ppli is not registered.
Indicator Light
Next
149
Advertisement
Chapters
