Table of Contents
Advertisement
Chapter 2
|
Setup
Thermo Scientific
Setup
2.1 Unpacking
The G3Lite controller is carefully packaged at the factory to protect the
unit from shipping damage.
Carefully remove the unit from its packing crate and unpack any other
equipment shipped with it such as TruFlow gas manifolds or bioreactor
vessels. Check the order form to ensure that all ordered items were
received.
If damage is found when the unit is unpacked, a claim should be filed
with the shipper and your Thermo Scientific representative notified.
It is recommended that the packing material be kept for possible future
use. Any returns for service must be shipped in Thermo Scientific
approved containers.
2.2 Setting up the controller
The controller is free-standing, with lockable wheels. Make sure that
the wheels are unlocked and carefully move the unit to where it is to
be installed. This should be a smooth floor surface. Ensure the unit is
visibly leveled and the wheels are locked.
Set the controller on a smooth floor surface. It is not necessary that the
controller be precisely level.
Inspect the controller and any equipment shipped with it. If the visual
inspection reveals no issues, continue with the setup process.
HyPerforma G3Lite Bioreactor Controller User's Guide
2
|
20
Advertisement
Table of Contents
