Emptying Waste Ink Tank; Drain Waste Ink Into A Container - MUTOH XpertJet XPJ-1641SR Training Manual

11. User Maintenance

11.4. Emptying waste ink tank (1/1)

Emptying waste ink tank
Emptying waste ink tank
In the following cases, drain waste ink in the waste ink tank into a container to empty
the tank.
・ When the waste ink tank is more than half full.
・ When "Full WasteInkTank" is displayed on the front panel.
Display messages
The waste ink tank is full. Empty the tank immediately.
・ The printer will stop operation until you empty the
waste ink tank.
1.

Drain waste ink into a container (1/2)

Wear the protective gloves ･glasses ･mask and avoid contact with your eyes or
skin.
Eye or skin contact may cause slight irritation or bloodshot eyes.
If in eyes or on skin, immediately flush with water.
If irritation is present, seek medical advice/attention immediately.
[1] Prepare a container to collect waste ink.
The capacity of the waste ink tank is 2,000 ml.
Make sure to prepare a container with at least 2,000 ml capacity.
[2] Cover the floor just under the waste ink tank using a paper that you do not use.
CSTM-XPJ16xxSR(E)_1.00
cf. Operation Manual(Rev.01-p.115)
Emptying waste ink tank
2. Drain waste ink into a container (2/2)
[3]
[4]
[5] Dispose of waste ink according to the local waste disposal regulations.
Page. 106
To Table of Contents
cf. Operation Manual(Rev.01-p.115)
Open the waste ink valve and drain waste ink into
the container.
To avoid ink splash, move the container closer
to the waste ink valve while draining waste
ink.
Once you empty the tank, close the waste ink
valve securely.
・ Wipe the opening of the valve with a cloth.
CONFIDENTIAL