Emptying Waste Ink Tank - MUTOH VJ-426UF Operation Manual

Emptying waste ink tank

3

Emptying waste ink tank

Emptying waste ink tank

When a certain amount of ink is used, the error LED in the operation panel of this product becomes ON, and a buzzer sounds.
Pour waste ink inside the waste ink tank to PET bottle, and discharge.
Display messages
NearFullWasteInkTank
Full WasteInkTank
CAUTION
UV curable Ink and waste fluid are harmful to skin. During this operation, wear the supplied gloves and make sure
that ink does not adhere to your skin. Wear safety goggle and protective clothing if necessary.
Important!
Empty the waste ink out of the tank before moving the printer.
If ink splashes inside the waste ink tank while being moved, it can cause damage.
1.
Transfer the waste ink
[1]
Prepare a container like PET bottle to transfer the waste ink.
Important!
The capacity of waste ink tank is 1500 ml. Make sure to prepare a container that has enough capacity when discharging waste ink.
[2]
The waste ink tank is about to become full. Empty the waste ink out of
the tank before it becomes full.
• Printing or other operation will continue while you do this.
The waste ink tank has become full. Immediately empty the waste ink
out of the tank.
• Printing or other operation will stop. It will resume when you have
carried out "ResetWasteInk" below.
Pull out the tip of the waste ink tube.
Emptying waste ink tank 75