12. Engineer Maintenance
12.1. Removing Covers (5/9)
cf. Maintenance Manual (XPJ-1682SR:Rev.00-3.2.7.)
IH Cover R (XPJ-1682SR)
Preparation:
・
Phillips Screwdriver No.2
Screws:
・
S Tight Cup M3x8 (x4)
[1] Remove S/C card(s).
[2] Remove ink cartridge(s).
[3] Remove screw(s).
[4] Remove IH cover R.
[5] To Assemble unit, reverse the removal procedure.
cf. Maintenance Manual (XPJ-1682SR:Rev.00-3.2.8.)
IH Cover L (XPJ-1682SR)
Preparation:
・
Phillips Screwdriver No.2
Screws:
・
S Tight Cup M3x8 (x4)
[1] Remove S/C card(s).
[2] Remove ink cartridge(s).
[3] Remove screw(s).
[4] Remove IH cover L.
[5] To Assemble unit, reverse the removal procedure.
CSTM-XPJ16xxSR(E)_1.00
cf. Maintenance Manual (XPJ-1641SR:Rev.00-3.2.8./XPJ-1682SR:Rev.00-3.2.9.)
Top Cover (1/2)
Preparation:
・
Phillips Screwdriver No.2
Screws:
・
Tap Tight S M4x8 (x13)
[3]
[1] Remove side cover R.
[2] Remove side cover L.
[3] Remove panel unit.
[4] Remove front cover.
[5] Remove IH cover(s).
[3]
・
Removal of IH cover(s) is recommended.
You may remove top cover while IH cover R remains.
However, removal of top cover may scratch IH cover(s).
[6] Remove the cable.
・
排気ファンケーブルAssy
[7] Remove screw(s).
・
Screw(s) B (x2) fix LED Light (right).
・
LED Light falls free as the screw(s) removed.
・
Hold LED Light (right) while removing the screw(s).
[8] Remove LED Light.
[3]
・
Remove one LED Light (right) in this jov sequence.
[9] Remove the cable.
・
LED Light Cable 1
[10] Assemble LED Light.
[3]
Page.
129
To Table of Contents
[6]
[7]
[8]
[9]
[10]
CONFIDENTIAL