Ink Status; Roll Length - MUTOH XpertJet XPJ-1641SR Training Manual

10. Advanced Operations
10.2. Menu 1: Setup (7/12)
Menu 1: Setup
Setup 15: Auto Cleaning
While Printing menu
Choose the auto cleaning mode and timer to be
performed while printing.
Submenus
When the cleaning type is set to other than Off
If the cleaning type is set to Short, Normal, or Long,
the display goes to the Cleaning Interval setting to set
the timer for auto cleaning while in printing.
Setting values
Before Print menu
Choose the auto cleaning mode to be performed
before printing.
Setting values
CSTM-XPJ16xxSR(E)_1.00
cf. Operation Manual(Rev.01-p.84)
<Off> / Short / Normal / Long
<> indicates the initial value.
5 min to 180 min
<> indicates the initial value.
<Off> / Short / Normal / Long
<> indicates the initial value.
Setup 16: Ink Status
To display various information of Ink, use genuine ink and S/C cards.
If Ink bags other than genuine Ink bags are used, ink status will not be displayed
correctly.
Setup 17: Roll Length
Setting values
When the "Roll Kind" is set to "Roll 1", "Roll 2" or "Roll 3"
Length menu
Setting values
Page. 90
To Table of Contents
cf. Operation Manual(Rev.01-p.85)
Displays the percentage of ink level in each ink bag.
The below is an example when using XPJ-1682SR.
Sets up the media length.
Roll Length is not used.
This is the initially set value.
Sets up the media length.
The set values of the media length can be set
as "Roll1" to "Roll3".
Sets up the media length.
1 m to <30 m> to 1,500 m
<> indicates the initial value.
CONFIDENTIAL