Emptying Waste Ink Tank - MUTOH ValueJet VJ-426UF Operation Manual

Emptying waste ink tank

3

Emptying waste ink tank

Emptying waste ink tank

When a certain amount of ink is used, the error LED in the operation panel of this product becomes ON, and a buzzer sounds.
Pour all waste ink in the waste ink tank into a container (e.g. PET bottle). After emptying the waste ink tank, reset the waste ink
counter.
Display messages
NearFullWasteInkTank
Full WasteInkTank
WARNING
Do not mix waste ink with any other chemicals, even in a small amount.
If mixed with other chemicals (e.g. oxidizing agent), it may produce heat. Before pouring waste ink into a container, make sure
• the container is empty.
• inside the container is completely dry.
CAUTION
Skin or eye contact with UV curable ink may cause skin inflammation or allergic reaction.
For this operation, be sure to wear the supplied gloves (or solvent resistant gloves) and goggles to prevent ink from contacting
with your eyes or skin.
Important!
Empty the waste ink out of the tank before moving the printer.
If ink splashes inside the waste ink tank while being moved, it can cause damage.
86 Emptying waste ink tank
The waste ink tank is about to become full. Mutoh recommends that
you empty the waste ink tank before it is completely full.
• Printing or other operation will continue while you do this.
The waste ink tank has become full. Empty the waste ink tank
immediately.
• Printing or other operation will stop. It will resume when you have
carried out "ResetWasteInk" below.