Unpacking The Printer - MUTOH XpertJet XPJ-1641SR Training Manual

5. Unpacking and Initial Setup
5.2. Unpacking (2/4)
Unpacking
Use the designated power cords.
Failure to do so may result in electric shock or fire.
Your computer must meet the following minimum requirements:
・ OS: Windows 10 (64bit), Windows 8/8.1 (64bit), Windows 7 (64bit)
・ CPU: Intel (R) Core (TM) i5 / i7
・ Memory: 8GB minimum
・ Network:
XPJ-1641SR: Use a network port that supports Ethernet port, Ethernet cable
(Category 5 or later)
XPJ-1682SR: Use a network port that supports Gigabit Ethernet port, Gigabit
Ethernet cable (Category 6 or later)
Items marked with an asterisk (*) above are accessories or supplies.
CSTM-XPJ16xxSR(E)_1.00
cf. Startup Guide(Rev.01-p.4)
Page.

Unpacking the printer

Unpack the product.
・ Minimum four people are required for unpacking and moving this product.
・ When taking out the product from the packing box, remove the plastic sheet
wrapped around the product, then take out the product.
Failure to do so may cause slip and damage to the product.
・ Keep the product level while moving it.
[1] Open the packing box and take out the items listed below.
21
To Table of Contents
cf. Startup Guide(Rev.01-p.5)
CONFIDENTIAL