MUTOH XpertJet XPJ-1641SR Training Manual page 45

5. Unpacking and Initial Setup
5.8. Setting the Printing Precision (6/13)
Calibrating your printer
Print quality calibration
Sets up when adjusting the printer for the optimum
quality of image print.
Before adjusting this setting, enter the thickness of
the media.
Submenus
Adjust Print 1: Standard
Adjusts only the print mode in the user type setting
which is currently set.
→
→
→
Submenus
CSTM-XPJ16xxSR(E)_1.00
cf. Operation Manual(Rev.01-p.63)
Adjusts only the print mode in the user type
setting which is currently set.
Adjusts the print modes other than the mode
in the user type setting which is currently set.
Perform an automatic calibration that the
printer automatically prints and scans a pattern
with the embedded color sensor to correct dot
placement.
"Confirm pattern"
"Rough adjustment pattern"
"Fine adjustment pattern"
Print the test pattern for the adjustment.
Check before adjusting.
Perform this to adjust large misalignment.
Print Adjust pattern and enter the set value.
Perform this to adjust small misalignment.
Print Adjust pattern and enter the set value.
Print quality calibration
Adjust Print 2: Custom
Submenus
Page. 45
To Table of Contents
cf. Operation Manual(Rev.01-p.64)
Perform adjustment for all patterns (A to F).
→ "Confirm pattern"
→ "Rough adjustment pattern"
→ "Fine adjustment pattern"
The test patterns of A to F will be printed for
Adjust print.
Check before adjusting.
For printing all rough adjustment patterns
from A to F.
For printing an adjust pattern selected from A
to F.
For printing all fine adjustment patterns from A
to F.
For printing an adjust pattern selected from A
to F.
CONFIDENTIAL