Emptying The Waste Bottle - MUTOH Falcon Outdoor Jr. Operation Instructions Manual

6.5. EMPTYING THE WASTE BOTTLE

When printing A0 size or larger widths, very small amounts of ink will be ejected on the left edge for stable
printing quality. The waste ink ejected on the left side in that way is collected in a translucent bottle under the
main unit (the waste ink bottle).
Step 1 :
Since there is no panel display or lamp display when the waste liquid absorbent sheet in the
waste ink bottle is to be replaced, you should prepare to replace the waste liquid absorbent sheet
when you see that the bottle is about half full. Have a new absorbent sheet, a thick vinyl bag and
a pair of forceps ready.
Note:
Conditions vary for the waste ink bottle to become half full but it will be after printing
about 2000 A0 pages.
Step 2 :
Remove the waste ink bottle by opening the lid.
Step 3 :
Empty the waste bottle.
Step 4 :
Replace the empty waste bottle and close the lid.
Caution:
If you accidentally touch the waste liquid, wash with soap and water at once.
If it should enter your eye, wash with plenty of water and see a doctor. If it is licked,
gargle with water and wash out straight away. If it is swallowed, immediately drink plenty
of water and consult a doctor without delay.
Falcon Outdoor Jr. – Operation Instructions
Page
69
PN: MAI-75039
Rev. 1.A – 07/26/05