Moving The Printer; Transporting The Printer - MUTOH XpertJet XPJ-1641SR Training Manual

11. User Maintenance
11.14. Moving or transporting the printer (1/1)
Moving or transporting the printer

Moving the printer

This section describes how to move the printer.
・ When moving the printer, make sure to maintain a horizontal position.
・ Do not tilt, set against something or place this product upside down.
Otherwise the ink may leak or the handling mentioned above may cause
abnormality.
1. Preparation before moving
[1] Make sure that the printer is turned OFF.
[2] Dispose of waste fluid.
[3] Remove all the cables, such as Power cord set.
[4]
[5] Move the printer.
2. Reinstalling
[1] Select a suitable place for installation.
[2] Move and install the printer to the location.
[3] Attach Cables, such as Power cord set.
[4] Perform Nozzle check, and then confirm that there is no clogging in Print head.
[5] Perform print quality adjustment.
CSTM-XPJ16xxSR(E)_1.00
cf. Operation Manual(Rev.01-p.136)
Loosen the four adjusters of Stand as shown in
the left.

Transporting the printer

When transporting the printer, make sure to pack it in the same condition as purchased,
using protective and packing materials to protect the printer from vibration and shocks.
Page. 120
To Table of Contents
cf. Operation Manual(Rev.01-p.137)
CONFIDENTIAL