4. Introduction
4.2. Name of each part (3/4)
Introduction
Main components of your printer
◆
Front side
Cutter
Automatically cut the media after printing.
Media cut groove
Manually cut the media along the groove.
CSTM-XPJ16xxSR(E)_1.00
cf. Operation Manual(Rev.01-p.9)
Page.
◆
Rear side
Ink slots
Insert an ink bag case into the slot.
(Illustration: XPJ-1682SR)
◆XPJ-1641SR
◆XPJ-1682SR
Media feed slot
Insert the front edge of the media into this slot
and pass it to the front side to load it into the
printer.
Media guide
Pass a roll media through the media guide.
12
To Table of Contents
CONFIDENTIAL