Activation; Activation Through The Front Panel; Activation Through Internet - MUTOH XpertJet XPJ-1641SR Training Manual

5. Unpacking and Initial Setup
5.5. Printer Initial Setup (3/7)
Printer Initial Setup
Step 1 Powering on - Initial settings on the front panel
[8]
[9]
Step 2 Activation
Follow the steps below to perform activation.
When the message on the left appears, use one of the
following
methods to activate the printer.
→
→
While "Activation required" is displayed, you can return the initial setting flow (e.g. IP
Address etc.) by tapping [Home] key.
CSTM-XPJ16xxSR(E)_1.00
cf. Startup Guide(Rev.01-p.19)
Sets the gateway.
key: Increase the number
key: Decrease the number.
key: Move the cursor to the previous digit.
key: Move the cursor to the next digit.
Tap [Enter] after entering each digit.
The printer will start mechanical initialization.

"Activation through the front panel"

"Activation through Internet"

Step 2 Activation
Activation through the front panel
[1]
[2]
To obtain the activation code, please contact your local MUTOH dealer to send it by
email.
[3]
Activation through Internet
To obtain the activation code and the Printer Activation Guide, access to MUTOH Club
from the following URL and click "Register" to complete the user registration.
https://club.mutoh.co.jp/mutoh/guser/
Page. 30
To Table of Contents
cf. Startup Guide(Rev.01-p.20)
When the message on the left appears, tap
[Enter].
Enter the 16-digit activation code.
key: Increase the number.
key: Decrease the number.
key: Move the cursor to the previous digit.
key: Move the cursor to the next digit.
Tap [Enter] after entering each digit.
When the message on the left appears, long press
the Power button to power off the printer.
・ When the message "Power Off" appears on the
panel, release the Power button.
Wait for a few seconds and long press the Power
button to reboot the printer.
When the message on the left appears on the front
panel, follow the instructions on the Printer Activation
Guide to activate the printer.
CONFIDENTIAL