Slant Check; Auto Cleaning; When The Cleaning Type Is Set To Other Than Off - MUTOH XpertJet XPJ-1641SR Training Manual

10. Advanced Operations
10.2. Menu 1: Setup (6/12)
Menu 1: Setup
Setup 14: Slant Check
Sets up slanting detection during media loading.
Setting values
Setup 15: Auto Cleaning
Configure the settings for the auto cleaning operation.
Submenus
CSTM-XPJ16xxSR(E)_1.00
cf. Operation Manual(Rev.01-p.82)
Slant Check is not performed.
This is the initially set value.
Slant Check is performed.
Setup 15: Auto Cleaning
Standby Mode menu
Submenus

When the cleaning type is set to other than Off

Setting values
Page. 89
To Table of Contents
cf. Operation Manual(Rev.01-p.83)
Choose the auto cleaning mode and timer to be
performed while in standby mode.
Off / Short / <Normal> / Long
<> indicates the initial value.
If the cleaning type is set to Short, Normal, or Long,
the display goes to the Cleaning Interval setting to set
the timer for auto cleaning while in standby mode.
10 min to <360 min> to 1,440 min
<> indicates the initial value.
CONFIDENTIAL