Inside Cleaning - MUTOH XpertJet XPJ-1641SR Training Manual

11. User Maintenance

11.10. Inside cleaning (1/1)

Cleaning
Inside cleaning
Cleaning period:
・ Monthly
・ When dust or ink stains are visible
Preparation:
・ Soft brush
・ Paper towel or Soft cloth
・ Ethanol (commercially available item: Use one with a concentration of 50% or higher.)
・ Gloves
Unplug the power cable with the power OFF, before cleaning the inside of the
printer.
Step (1/2)
[1] Remove the media.
[2] Make sure that the printer is turned OFF.
[3] Open the front cover.
Immediately after turning off the power, the temperature of the heater in
this product is very high.
Touch the platen or media guide and if it is too hot, allow it to cool before
cleaning.
[4]
CSTM-XPJ16xxSR(E)_1.00
cf. Operation Manual(Rev.01-p.129)
Brush off dusts on the pressure rollers with a soft
brush.
Do not blow off dusts inside the product with
a gas duster.
Dust can attach to moving parts, causing
abnormal sound or malfunctions.
Inside cleaning
Step (2/2)
[5]
[6] Close the front cover.
Page. 114
To Table of Contents
cf. Operation Manual(Rev.01-p.129)
Use a soft cloth or paper towel slightly dampened
with ethanol to clean off the ink on the platen,
media guide and paper guide.
Wear protective gloves while cleaning.
CONFIDENTIAL