MUTOH XpertJet XPJ-1641SR Training Manual page 14

4. Introduction
4.3. Front Panel (2/2)
Introduction
Main components of your printer
◆ Front Panel
①
②
⑤
④
③
⑤ Arrow keys:
When you have entered the setup menu, the arrow keys are used to
select a menu or enter a value.
key: Go to the previous item.
key: Return to the upper level menu without saving the change.
key: Go to the sub menu.
key: Go to the next item.
While the printer is in standby mode, it is used to feed media, run a
nozzle check, or perform head cleaning.
key: Feed the media backward.
Long-touch to feed it with high speed.
key: Tap to run a nozzle check.
key: Tap to perform cleaning.
key: Feed the media forward.
Long-touch to feed it with high speed.
CSTM-XPJ16xxSR(E)_1.00
cf. Operation Manual(Rev.01-p.11)
⑥
⑦
⑥ [Power] button
・ Long press to power on the printer.
The Power LED (above the Power button) turns on with a solid
white light.
・ While the power is on, long press the button to power off the
printer.
In the Off state, the Power LED lights off.
The symbol means "standby".
Even the Power LED turns off, the device still consumes some power
unless the power cords are disconnected.
This state is referred to as the power being "off" in this Manual.
⑦ [Enter] key
Use the Enter key to select a menu or confirm a value.
・ While the printer warms up, tap the Enter key to start printing
immediately before fully warming up.
Page. 14
To Table of Contents
CONFIDENTIAL