Effect - MUTOH XpertJet XPJ-1641SR Training Manual

9. Printing
9.2. Print Mode (4/4)
Print Mode
◆ XPJ-1682SR (Double head, 8slot) / 4 color-settings
※ Banner mode
Print Mode Banner 1
CR 720dpi
(2pass)
PF 720dpi
(2pass)
Total Pass 4pass
Print Direction
Uni-D
(unidirectional)
CR Speed 320cps
VSD1
Dot Family in
Variable
normal settings
(by default)
VSD1
Dot Family in fixed
Medium Dot
dot

Effect

Fine & Fog
(by default)
Throughput 12.84m /h
2
Comparison
The above throughput values are based on the Mutoh measurement,
The accuracy of these values are not guaranteed.
・ Printing condition for throughput measurement.
Data width: 1615 mm, Data length: 620 mm , Head Travel: Data
・ Effect: by default
In addition to the above, custom print modes are available by PM Command.
In some custom print modes, MPS must be required (MPS is not required in
standard print modes).
CSTM-XPJ16xxSR(E)_1.00
Banner 2 Banner 3 Banner 4
720dpi 720dpi 720dpi
(2pass) (2pass)
720dpi 360dpi 360dpi
(2pass) (1pass)
4pass 2pass 2pass
Bi-D
Uni-D Bi-D
(bidirectional)
(unidirectional) (bidirectional)
320cps 320cps 320cps
VSD1 VSD1 VSD1
Variable Variable Variable
VSD1 VSD1 VSD1
Medium Dot Large Dot Large Dot
Fine & Fog None None
21.00m /h 31.49m /h 48.21m
2 2
9.3. Effect (1/1)
Effect
・ The Effect function is not used.
(2pass)
(1pass)
・ The printing joint will be the wave form.
・ The printing joint will shade off.
・ The printing joint will shade off as the wave
form.
/h
2
・ The printing joint will shade off.
・ Performs "Wave" printing using the left side
of the of Print head.
・ Performs "Wave" printing using the right side
of the of Print head.
Page. 79
To Table of Contents
CONFIDENTIAL