12. Engineer Maintenance
12.1. Removing Covers (6/9)
cf. Maintenance Manual (XPJ-1641SR:Rev.00-3.2.8./XPJ-1682SR:Rev.00-3.2.9.)
Top Cover (2/2)
[11] Remove screw(s).
[12] Remove top cover.
Removal from the back side is recommended.
[13] To Assemble unit, reverse the removal procedure.
CSTM-XPJ16xxSR(E)_1.00
cf. Maintenance Manual (XPJ-1641SR:Rev.00-3.2.9./XPJ-1682SR:Rev.00-3.2.10.)
Bottom Cover R
Preparation:
・
Phillips Screwdriver No.2
Screws:
・
S Tight Cup M4x12 (x2)
・
S Tight Cup M4x10 (x4)
[11]
[1] Remove maintenance cover R.
[2] Remove screw(s).
[3] Remove bottom cover R.
[11]
・
Bottom cover is fixed with latch(es)
(x3) in the frame.
[4] To Assemble unit, reverse the
removal procedure.
[11]
cf. Maintenance Manual (XPJ-1641SR:Rev.00-3.2.10./XPJ-1682SR:Rev.00-3.2.11.)
Bottom Cover L
Preparation:
・
Phillips Screwdriver No.2
[12]
Screws:
・
S Tight Cup M4x12 (x2)
・
S Tight Cup M4x10 (x4)
[1] Remove maintenance cover L.
[2] Remove screw(s).
[3] Remove bottom cover L.
・
Bottom cover is fixed with latch(es)
(x3) in the frame.
[4] To Assemble unit, reverse the
removal procedure.
Page.
130
To Table of Contents
[2]
[2]
[3]
[3]
[2]
[2]
[3]
[3]
CONFIDENTIAL