MUTOH XpertJet XPJ-1641SR Training Manual page 71

8. Print head
8.4. Replacing print head [XPJ-1682SR] (2/2)
cf. Maintenance Manual(XPJ-1682SR: Rev.00-3.8.14.)
Replacing print head [XPJ-1682SR] (3/4)
[10] Place print head(s) on polyknit wiper in the
stainless steel tray.
Spread polyknit wiper on stainless steel tray. Pour
cleansing fluid as deep as covering polyknit wiper.
[11] Remove head cover.
Lift both latches (R+L)
[12] Remove valve head.
Apply plyers.
[14] To Assemble unit, reverse the removal procedure.
[15] Perform necessary adjustment.
CSTM-XPJ16xxSR(E)_1.00
Replacing print head [XPJ-1682SR] (4/4)
[10]
Parts replaced
Printer head
[12]
Page. 71
cf. Maintenance Manual(XPJ-1682SR: Rev.00-4.2.)
Order Adjustment item
1 Head rank input
(including initial ink charge)
2 Head nozzle check
3 Head slant check
4 Uni-D (H_Adjust 1) Adjustment(Low) 4.7.
5 Uni-D (H_Adjust 2) Adjustment(Low) 4.7.
6 Bi-D Adjustment(Low)
7 Uni-D / Bi-D Copy(Mid/High)
8 Test printing
To Table of Contents
Reference
5.17.
5.7.6.
4.7.
4.7.
4.7.
-
CONFIDENTIAL