Emptying Waste Ink Tank - MUTOH VJ-628 ValueJet Operation Manual

Emptying waste ink tank

3

Emptying waste ink tank

When a certain amount of ink is used, the error LED in the operation panel of this product becomes ON, and a buzzer sounds.
Pour waste ink inside the waste ink tank to PET bottle, and discharge.
CAUTION
• Be cautious that ink does not get into your eye or make a contact with your skin. Wear goggles and groves. When
ink gets into your eye or make a contact with your skin, wash with water immediately. If left as it is, it may cause
red eye or light inflammation. If it is necessary, please see your doctor immediately.
Important!
When moving this product, always empty the waste ink tank even if it is for a short distance.
If ink splashes inside the waste ink tank while being moved, it can cause damage.
Steps
[1]
[2]
Launch VSM and display the remote panel.
"Launching/Displaying/Finishing ValueJet Status Monitor (VSM)" on page 9
[3]
Check [Status Information] in the [Printer Status] tab.
• A message indicating that the waste ink tank is full is displayed.
[4]
Prepare a container like PET bottle to transfer the waste ink.
Important!
The capacity of waste ink tank is 1500 ml. Make sure to prepare a container that has enough capacity when discharging waste ink.
Check the error LED is flashing.
Replacing ink cartridge 49