MUTOH XpertJet XPJ-1641SR Training Manual page 74

9. Printing
9.1. User Type (3/5)
Menu 1: Setup
**>1: Print Mode (Effect)
Select an effect setting.
・ Set up this menu when you want to improve print
quality by adjusting the set print mode.
Setting values
CSTM-XPJ16xxSR(E)_1.00
cf. Operation Manual(Rev.01-p.62)
The Effect function is not used.
The printing joint will be the wave form.
The printing joint will shade off.
(XPJ-1641SR Only)
The printing joint will shade off as the wave
form.
The printing joint will shade off.
Performs "Wave" printing using the left side of
the of Print head.
(XPJ-1682SR Only).
Performs "Wave" printing using the right side
of the of Print head.
(XPJ-1682SR Only).
Edges between each pass are barely noticeable
and more seamless
(XPJ-1682SR Only).
Menu 1: Setup
**>2: Adjust Print>
Submenus
Page. 74
To Table of Contents
cf. Operation Manual(Rev.01-p.63)
Sets up when adjusting the printer for the optimum
quality of image print.
Before adjusting this setting, enter the thickness of
the media.
Adjusts only the print mode in the user type
setting which is currently set.
Adjusts the print modes other than the mode
in the user type setting which is currently set.
Perform an automatic calibration that the
printer automatically prints and scans a pattern
with the embedded color sensor to correct dot
placement.
CONFIDENTIAL