Initial Setup Flow Via Startup Wizard; Powering On - Installing Msm; Printer Initial Setup - MUTOH XpertJet XPJ-1641SR Training Manual

5. Unpacking and Initial Setup

5.5. Printer Initial Setup (1/7)

Printer Initial Setup

Initial Setup Flow via Startup Wizard

Here is how to get started with your printer.
Use one of the following methods to run the initial setup.
・ Follow the instructions in the Startup Wizard to set up the settings via computer.
・ Follow the instructions in this Guide to set up the settings from operation panel.
CSTM-XPJ16xxSR(E)_1.00
cf. Startup Guide(Rev.01-p.15)
Page.

Powering on - Installing MSM

To run the initial setup through the Startup Wizard on MSM, install MSM on your
computer.
Then follow the Startup Wizard to run the initial setup.
・ Make sure to install MSM stored in the supplied CD.
[1] Check that the front cover is closed.
[2] Long press the Power button on the front panel.
・ The Power LED (above the Power button) lights up.
・ The printer will start mechanical initialization.
Once the Power LED lights up, release the Power button.
[3] Use the Ethernet cable to connect the printer to your computer
[4] Insert the supplied CD into the CD-ROM drive.
・ The Startup Wizard will start up automatically.
・ If the Startup wizard does not automatically start,
right click the icon of CDROM drive, open the
contents of CD with [Open], and double click
MpTotalInst.exe.
[5] Follow the instructions on the Startup Wizard to setup.
・ When setup is complete, carry out test printing.
・ Please keep the supplied CD at hand. You will need it for reinstallation.
・ If lost, you can download from MUTOH Club (user registration is required).
(MUTOH Club) https://club.mutoh.co.jp/mutoh/guser
28
To Table of Contents
cf. Startup Guide(Rev.01-p.16)
CONFIDENTIAL