Ip Address; Subnet Mask; Gateway; Header Dump - MUTOH XpertJet XPJ-1641SR Training Manual

10. Advanced Operations
10.2. Menu 1: Setup (10/12)
Menu 1: Setup
Setup 23: IP Address
Sets the IP address of the printer.
・ Use
・ Use
・ Use
・ Use
Tap [Enter] after entering each digit.
Setting values
Be sure to set the IP address, Subnet mask, and Gateway after consulting the network
administrator.
Setup 24: Subnet Mask
Sets the subnet mask of the printer.
・ Use
・ Use
・ Use
・ Use
Tap [Enter] after entering each digit.
Setting values
Be sure to set the IP address, Subnet mask, and Gateway after consulting the network
administrator.
CSTM-XPJ16xxSR(E)_1.00
cf. Operation Manual(Rev.01-p.89)
to increase a digit.
to decrease a digit.
to move the cursor to the previous digit.
to move the cursor to the next digit.
0.0.0.0 to <192.168.1.253> to
255.255.255.255
<> indicates the initial value.
to increase a digit.
to decrease a digit.
to move the cursor to the previous digit.
to move the cursor to the next digit.
0.0.0.0 to <255.255.255.0> to
255.255.255.255
<> indicates the initial value.
Setup 25: Gateway
Setting values
Be sure to set the IP address, Subnet mask, and Gateway after consulting the network
administrator.
Setup 26: Header Dump
Page. 93
To Table of Contents
cf. Operation Manual(Rev.01-p.89)
Sets the gateway.
・ Use to increase a digit.
・ Use to decrease a digit.
・ Use to move the cursor to the previous digit.
・ Use to move the cursor to the next digit.
Tap [Enter] after entering each digit.
0.0.0.0 to <192.168.1.254> to
<> indicates the initial value.
Sets whether to print the following information when
printing.
・ Data header
・ Data dot number
(printed only when Header damp setting is "On")
・ Printing date and time
・ Printer serial number
・ Firmware version
・ Receiving time
(printed only when Header damp setting is "Dump")
・ Receiving size
(printed only when Header damp setting is "Dump")
255.255.255.255
CONFIDENTIAL