4. Introduction
4.2. Name of each part (2/4)
Introduction
Main components of your printer
◆
Front side
Waste ink tank
Collect waste ink produced during printing and
cleaning cycle.
Empty the tank as needed.
Stand
Adjuster
Carriage
The print head is installed on the carriage.
◆XPJ-1641SR
◆XPJ-1682SR
CSTM-XPJ16xxSR(E)_1.00
cf. Operation Manual(Rev.01-p.9)
Page.
Pressure rollers
Keep the media in place to ensure proper feeding.
The hold down pressure can be individually
reduced or canceled by slide lock levers on the
pressure rollers.
◆XPJ-1641SR
◆XPJ-1682SR
Edge holder
Place it on the edge of the media to prevent
media curl while printing.
While not printing, slide them to the left and right
side edges of the platen.
Platen
Media is printed on here.
There is an adsorption fan inside.
11
To Table of Contents
CONFIDENTIAL