Nozzle Check; Mode Print; Setup List; Palette - MUTOH XpertJet XPJ-1641SR Training Manual

10. Advanced Operations
10.3. Menu 2: Test Print (1/2)
Menu 2: Test Print
Test Print 1: Nozzle Check
Use this menu to check that the print head and print
nozzles you selected can properly print without nozzle
clogging and missing or too light lines.
・ The pattern shown above is an example when printed on XPJ-1682SR with 4-color
configuration.
・ The printer information (date and time printed, printer's serial number, firmware
version) is printed on the nozzle check pattern.
Test Print 2: Mode Print
Mode print can be performed. Used to confirm the
following printing conditions.
・ Print quality
・ Effect
・ Setting value for Heater
・ Micro adjustment value for feed correction
CSTM-XPJ16xxSR(E)_1.00
cf. Operation Manual(Rev.01-p.93)
Page.
Test Print 3: Setup List
Setup list printing is performed.
Use this to check the current setting contents and the
User Type.

◆ Setup List

Test Print 4: Palette
Palette print is executed for the color demonstration.
When the selected print mode of the user type is Graphics 1 or Graphics 2, Palette
menu is not displayed (XPJ-1682SR only).
96
To Table of Contents
cf. Operation Manual(Rev.01-p.94)
◆ User Type List
CONFIDENTIAL