MUTOH XpertJet XPJ-1641SR Training Manual page 86

10. Advanced Operations
10.2. Menu 1: Setup (3/12)
Menu 1: Setup
Setup 5: Media Width
Sets the width of the current media when the "Media
Initial menu" is set to "Off".
When the "Media Initial menu" is set to "Width", the
detected media width will be displayed.
Use
Setting values
Setup 6: Output Mode
Sets how the media is handled after printing.
Setting values
CSTM-XPJ16xxSR(E)_1.00
cf. Operation Manual(Rev.01-p.78)
or to enter the value, and tap [Enter].
210 mm to <1,000 mm> to 1,625 mm
<> indicates the initial value.
The Take-up Unit will not be used.
This is the initially set value.
Set when using the Take-up Unit.
Set when cutting the media automatically.
Setup 6: Output Mode
When the "Output Mode" is set to "Take Up"
Setting values
After setting the Page Gap, sets the Ink drying time.
Use or to enter the value, and tap [Enter].
Setting values
When the "Output Mode" is set to "Off" or "Auto Cut"
Setting values
Page. 86
To Table of Contents
cf. Operation Manual(Rev.01-p.78)
When the "Output Mode" is set to "Take up", the
menu is shifted to "Page Gap".
In the "Page Gap menu", you can change the margin
setting between images.
The default margin setting between images will
be applied.
This is the initially set value.
The margin setting between images is smaller
than Normal.
<0 sec> to 60 min
<> indicates the initial value.
Sets the ink drying time.
Use or to enter the value, and tap [Enter].
<0 sec> to 60 min
<> indicates the initial value.
CONFIDENTIAL