Precautions; Introduction - MUTOH XpertJet XPJ-1641SR Training Manual

4. Introduction

4.1. Precautions (1/1)

Introduction
Precautions
Please use this product at least once a week
・ If the printer is not used for a long time, the print head nozzles can get clogged
causing damage to the printer.
Please handle ink bag carefully
・ Before using an ink bag, make sure to read the Safety Data Sheet (SDS).
・ Do not disassemble Ink bag.
Ink may come into contact with your eyes or skin, causing irritation or allergic
reaction.
・ Wear protective gloves, glasses, and mask when handling ink bags.
・ Avoid contact with your eyes or on your skin.
If in your eye or on your skin, immediately wash with water.
It could cause bloodshot eyes or light inflammation.
Should any anomalies occur, immediately seek medical attention.
・ DO NOT drop or hit an ink bag.
Ink may leak from the bag.
・ Be sure to use the ink before it expires.
The expired ink should be disposed of as industrial waste.
The empty ink bag should be put in a plastic bag and should be disposed of
according to the local regulations.
・ MUTOH strongly recommends to use genuine ink.
This printer is designed to bring out the best performance when using with the
MUTOH genuine ink.
Non-MUTOH ink may cause print defects or damage to the printer.
CSTM-XPJ16xxSR(E)_1.00
cf. Operation Manual(Rev.01-p.20)
Page.
Conduct periodic maintenance
This product requires regular user maintenance.
・ Run a nozzle check before and after printing.
If nozzle missing is found, run a head cleaning.
・ Clean the cleaning wiper and around the print head once a week.
・ If you are not using the printer for an extended period*, run a head cleaning once
a week.
If you may not be able to perform weekly head cleaning, perform [Longstore]
*"Extended period" means one to four weeks.
・ Clean inside of your printer once a month.
・ Regularly check the waste ink tank and empty the tank as needed.
Some parts need to be replaced periodically
In this product, there are some parts required to be replaced after a long-term use.
・ User replaceable parts: Absorption material for the flushing box, Cutter, Cleaning
wiper
・ Parts required to be replaced by service personnel: Motors, Pumps, Print heads
9
To Table of Contents
CONFIDENTIAL