Job Status; Temperature; Length - MUTOH XpertJet XPJ-1641SR Training Manual

10. Advanced Operations
10.8. Menu 7: Display (2/2)
Menu 7 : Display
Display 2: Temperature
Choose the unit of the temperature displayed on the
operation panel.
Setting values
Display 3: Length
Choose the unit of the length displayed on the
operation panel.
Setting values
CSTM-XPJ16xxSR(E)_1.00
cf. Operation Manual(Rev.01-p.103)
Displays the temperature in Celsius.
This is the initially set value.
Displays the temperature in Fahrenheit.
Displays the length in millimeters (mm).
This is the initially set value.
Displays the length in inches (inch).
10.9. Menu 8: Job Status (1/1)
Menu 8 : Job Status
・ The values displayed in this function are just standard values, not guarantee the
accuracy.
・ If the print data includes no length data, all information will be displayed as "0".
・ This function is to check the information of print data with the print operation is
completed. For the details on data while printing, please refer to the "Menu 7: Job
Status"
Page. 101
To Table of Contents
cf. Operation Manual(Rev.01-p.104)
Various information of previous print will be displayed.
Displays if the print is completed.
・ When the print is completed: [Completed]
・ When the print is canceled: [Canceled]
The total length of print data (media feeding
direction) will be displayed.
The printed length will be displayed.
The remaining length of print data will be
displayed.
CONFIDENTIAL