User Type; Setup; Print Mode - MUTOH XpertJet XPJ-1641SR Training Manual

9. Printing

9.1. User Type (1/5)

Menu 1: Setup
Setup 1: User Type
You can have up to 15 groups of User Type, labeled
"Type1" to "Type15".
When you select a User Type group ("Type") and tap
[Enter], that definition group will be set for the printer.
Also, a submenu will be displayed.
Setting values
Submenus
When you change to another User Type, all the settings that can be set via the
User Type will be changed.
・ The settings that can be set via the User Type include "Print Mode", "Effect"
the adjustment value for "Adjust Print", "PF Adjust", the setting value for
"Pre Heater", "Platen Heater", "Dryer", "Vacuum Fan" and "Thickness".
When using the printer for the first time or using a new roll media, configure a
user type settings.
CSTM-XPJ16xxSR(E)_1.00
cf. Operation Manual(Rev.01-p.60)
Select a "Type" number, from "Type1" to
"Type15".
Menu 1: Setup
**>1: Print Mode
Setting values
Page. 72
To Table of Contents
cf. Operation Manual(Rev.01-p.61)
Select a print mode for the media.
・ Once selected, the panel displays the effect menu.
High-quality print mode.
The four types of mode are available: Quality 1
to Quality 4.
Standard print mode.
・ XPJ-1641SR:
There are four types: Graphics 1 and Graphics
4.
Graphics 2 is the initial setting.
・ XPJ-1682SR:
There are two types: Graphics 1 and Graphics
2.
Graphics 2 is the initial setting.
High-speed print mode.
There are four types: Banner 1 to Banner 4.
CONFIDENTIAL