MUTOH XpertJet XPJ-1641SR Training Manual page 44

5. Unpacking and Initial Setup
5.8. Setting the Printing Precision (5/13)
Calibrating your printer
Print quality calibration
Print quality calibration steps (1/2)
[1] Turn the printer ON and load a roll media.
[2]
[3]
[4]
[5]
[6]
[7]
CSTM-XPJ16xxSR(E)_1.00
cf. Operation Manual(Rev.01-p.36)
Tap [Home].
Tap .
Tap .
Use or to choose the user type you want to
use.
Tap [Enter].
・
Tap until the menu on the left appears.
・ Tap .
Enter the thickness of the media.
・ Use or to specify the thickness.
Tap [Enter].
・
Print quality calibration
Print quality calibration steps (2/2)
[8]
・ In Standard print quality adjustment and Custom print quality adjustment, the
names in the available patterns are different.
・ For a pre-adjustment check, select "Confirm Pattern.".
Check the printing results in "Confirm Pattern.",
・ To adjust large misalignment, select "Rough Pattern".
・ To adjust small misalignment, select "Fine Pattern".
[9] Follow the steps below and adjust the print quality.
→ "Standard or Custom Adjustment Methods"
→ "Auto Adjustment Method"
Page. 44
To Table of Contents
cf. Operation Manual(Rev.01-p.37)
Use or to choose the calibration method.
・ Tap .
CONFIDENTIAL