MUTOH XpertJet XPJ-1641SR Training Manual page 124

11. User Maintenance
11.15. Long-term storage (4/4)
Moving or transporting the printer
Performing initial charging after head cleaning
1. Step (3/4)
[9] Insert the ink bag cases and S/C cards into each slot.
・ Match the colors of the ink color indicating label on the printer and the label on
the ink bag.
・ Face the latch side toward you and insert the case into each slot.
・ Make sure that they are fully inserted.
During ink charging, make sure:
・ Not to turn OFF the printer.
・ Not to unplug the power cable of the printer.
・ Not to open the front cover.
・ Not to open the maintenance cover.
・ Not to release the pressure rollers.
[9]
CSTM-XPJ16xxSR(E)_1.00
cf. Operation Manual(Rev.01-p.143)
The message on the left will appear.
・ Ink charging begins.
When ink charging is complete, the message to
the left is displayed.
Performing initial charging after head cleaning
1. Step (4/4)
If the printer perform the nozzle check printing immediately after the initial ink
charge is complete, the following results may occur.
・ Printed lines become blurred.
・ The data is partially not printed.
such cases, follow "Menu 3: Cleaning" and perform "Little Charge".
Then, check the print result.
If there is no improvement in the print result even after performing "Little
Charge", leave the printer unused for an hour or more.
Then perform "Little Charge" again and check the print result.
Page. 124
To Table of Contents
cf. Operation Manual(Rev.01-p.144)
CONFIDENTIAL