Media Feed Adjustment - MUTOH XpertJet XPJ-1641SR Training Manual

5. Unpacking and Initial Setup
5.8. Setting the Printing Precision (10/13)
Calibrating your printer

Media feed adjustment

This adjustment must be performed when:
・ you use this product for the first time.
・ you use a new type of the media.
・ you have changed the holddown pressure on the pressure rollers.
Other than above cases, move to "Nozzle check and cleaning"
You will need a ruler to perform this adjustment.
If the following symptom appears on your print, this adjustment may help to solve the
problem.
・ Image overlapping.
・ Horizontal white lines on the print.
Media feed adjustment steps (1/2)
[1] Load a roll media.
[2]
[3]
[4]
[5]
CSTM-XPJ16xxSR(E)_1.00
cf. Operation Manual(Rev.01-p.38)
Tap [Home].
Tap .
Tap .
Use or to choose the user type you want
to use.
Tap [Enter].
・
Media feed adjustment
Media feed adjustment steps (2/2)
[6]
[7]
[8] Follow the steps below and adjust the print quality.
Page. 49
To Table of Contents
cf. Operation Manual(Rev.01-p.39)
Tap until the menu on the left appears.
・ Tap .
Use or to choose the menu.
・ Tap .
CONFIDENTIAL