Emptying The Waste Bottle - MUTOH ValueJet 1608 HS User Manual

User's Guide ValueJet 1608 HS
Basics
3.6

Emptying the waste bottle

The timing and method for the disposal of waste fluid are described below.
Disposal timing
Dispose the waste fluids in the following cases:


Disposal method
Follow the procedure below to dispose of waste fluid.
Important
Step 1:
Step 2:
Step 3:
Note
Step 4:
Step 5:
66
Downloaded From ManualsPrinter.com Manuals
When the waste fluid tank is more than half full.
When the operation panel displays "Waste Ink Tank Full".
Waste fluid is considered industrial waste. Proper waste fluid disposal

according to industrial waste disposal laws and ordinances of your local
government is required.
Prepare an empty container to contain the waste fluid.
Lay a protective material on the floor under the waste fluid tank.
Open the waste fluid valve, and transfer the waste fluid to the container.
When pouring the waste fluid to the empty container, the waste fluid may

splash, therefore put the container close to the waste fluid valve.
1
N°
1
Waste fluid valve
2
Empty container
After pouring the waste fluid into the empty container, close the waste fluid valve.
Wipe the opening of the waste fluid valve with a cloth.
2
Description
AP-75810 - Revision 2.0