Error Code Responses - Intel Agilex Configuration User Manual

Major Error Code
0xF006
HPS_WATCHDOG_TIMEOUT
0xF007
INTERNAL_UNKNOWN_ERROR
Table 37. CONFIG_STATUS and RSU_STATUS Minor Error Code Descriptions
Minor Error Code
0xD001
RSU_CMF_AUTH_ERR
0xD002
RSU_USER_AUTH_ERR
0xD003
RSU_CMF_DESC_SHA_MISMATCH
0xD004
RSU_POINTERS_NOT_FOUND_ERR
0xD005
RSU_QSPI_REQ_CHANGE
0xD006
RSU_FACTORY_IMAGE_FAILED
0xD007
RSU_CMF_TYPE_ERR

4.3.2. Error Code Responses

Table 38. Error Codes
Value (Hex)
0
OK
1
INVALID_COMMAND
Intel ® Agilex ™ Configuration User Guide
140
Error Type
Error Type
Error Code Response
Indicates that the command completed successfully.
A command may erroneously return the
successful.
Indicates that the command is incorrectly formatted.
• A device cleaning failure
• An HPS configuration failure
Contact your local Field Applications Engineer (FAE). Alternatively, submit a Service Request on the
My Intel support page to get the support on capturing the error log for further debug.
HPS watchdog timeout failure. Ensure that your design resets the watchdog timer correctly.
Indicates an internal device error due to an unknown task.
You can contact your local Field Applications Engineer (FAE). Alternatively, submit a Service
Request on the My Intel support page to get the support on capturing the error log for further
debug.
Authentication failure for the firmware.
Authentication failure for the design.
The SHA does not match for the firmware descriptor.
Unable to read data from boot ROM on first boot after the device exits power-on reset (POR).
Unable to configure the quad SPI flash during RSU initialization.
Failed to load any image, including the factory image.
The firmware version does not match the version that was previously loaded.
status if a command, such as
OK
4. Remote System Update (RSU)
UG-20205 | 2019.10.09
Description
Description
Description
QSPI_READ
is partially
continued...
Send Feedback