Debugging Guidelines For The As Configuration Scheme - Intel Agilex Configuration User Manual

Note: You do not need to specify the flash device for
device. In contrast, the
configuration device. The Intel Quartus Prime Programmer uses this additional data to establish communication with
the configuration device and then write the programming data.
9. Click Generate to generate the programming file or files.
Related Information
Intel Quartus Prime Pro Edition User Guide: Programmer
For comprehensive information about programming file generation and conversion.
3.2.10.2. Programming .pof files into Serial Flash Device
To program the
1. In the Programmer window, click Hardware Setup and select the desired download cable.
2. In the Mode list, select Active Serial Programming.
3. Click Auto Detect button on the left pane.
4. Select the device to be programmed and click Add File.
5. Select the
.pof
6. Click Start to start programming.
3.2.10.3. Programming .jic files into Serial Flash Device
To program the
1. In the Programmer window, click Hardware Setup and select the desired download cable.
2. In the Mode list, select JTAG.
3. Select the device to be programmed and click Add File.
4. Select the
.jic
5. Click Start to start programming.

3.2.11. Debugging Guidelines for the AS Configuration Scheme

Intel ® Agilex ™ Configuration User Guide
106
and
.poc .jic
into the serial flash device through the AS header, perform the following steps:
.pof
to be programmed to the selected device.
into the serial flash device through the JTAG interface, perform the following steps:
.jic
to be programmed to the selected device.
files because the
.rpd .rpd
files include both programming data and additional data specific to the
3. Intel Agilex Configuration Schemes
UG-20205 | 2019.10.09
format is independent of the flash
Send Feedback