Intel Agilex Configuration User Manual page 89

3. Intel Agilex Configuration Schemes
UG-20205 | 2019.10.09
In addition to AS programming using a
a as shown in AS Programming Using Intel Quartus Prime or Third-Party Programmer.
.pof
Table 25. Output File Types
Programming File Type
JTAG Indirect Configuration File
Send Feedback
, the Programmer supports direct programming of the quad SPI flash using
.jic
Extension
The enables serial flash programming via Intel FPGA JTAG pins. This file type is available
.jic .jic
only for ASx4 configuration. A newly populated board using the ASx4 configuration scheme
requires initial SDM firmware programming. The helper SOF image provides the required SDM
firmware.
You initially use the JTAG cable to load a SDM Helper SOF into the Intel Agilex device. The SDM
can then load the flash device with the Intel Agilex design.
Description
Intel ® Agilex ™ Configuration User Guide
89