Intel Agilex Configuration User Manual page 33

2. Intel Agilex Configuration Details
UG-20205 | 2019.10.09
Note:
Intel recommends that you assign the
internal pull-downs resistors. If you cannot use these pins, Intel recommends that you include external 4.7-kΩ pull-down
resistors to avoid false signaling.
2.5.3.1. Specifying Optional Configuration Pins
You enable and assign the SDM I/O pins using the Intel Quartus Prime software.
Complete the following steps to assign these additional configuration pins:
1. On the Assignments menu, click Device.
2. In the Device and Pin Options dialog box, select the Configuration category and click Configuration Pins Options.
3. In the Configuration Pin window, enable and assign the configuration pin that you want to include in your design.
Send Feedback
and pins to SDM I/O pins 0 or 16. These pins have weak
CONF_DONE INIT_DONE
Intel ® Agilex ™ Configuration User Guide
33