Remote System Update Using As Configuration - Intel Agilex Configuration User Manual

4.1.2. Remote System Update Using AS Configuration

Remote system update using AS configuration includes the following components:
• Your remote system update host design. The host can be custom logic, the HPS, or a Nios
• One factory image.
• Flash memory for image storage.
• At least one application image.
• Designs that do not use the HPS as the remote system update host require an Mailbox Client Intel FPGA IP as shown in
the figure below. The Mailbox Client sends and receives remote system update operation commands and responses, such
as
QSPI_READ
Figure 54. Intel Agilex Remote System Update Components
Intel ® Agilex ™ Configuration User Guide
124
and .
QSPI_WRITE
Flash
Memory
JTAG
Interface
External
RSU Host
Logic
®
System
Board
Intel FPGA
Secure Device Manager
(SDM)
Avalon-MM Interface
Mailbox Client IP
Avalon-MM Interface
FPGA Fabric
User Logic
RSU Host
Controller
4. Remote System Update (RSU)
UG-20205 | 2019.10.09
II processor in the FPGA.
Send Feedback