Intel Agilex Configuration User Manual page 136

Command Code
(Hex)
5B
RSU_STATUS
(9)
This number does not include the command and response header.
Intel ® Agilex ™ Configuration User Guide
136
Command Response
(9) (9)
Length Length
0 9 Reports the current remote system upgrade status. You can use this command to check the
configuration status during configuration and after it has completed. This command returns the
following responses:
Word
0-1
2-3
4
5
6
7
Description
Summary Description
Current image Flash offset of the currently running application image.
Failing image Flash offset of the highest priority failing application
image. If multiple images are available in flash memory,
stores the value of the first image that failed. A value of
all 0s indicates no failing images. If there are no failing
images, the remainder of the remaining words of the
status information do not store valid information.
State Failure code of the failing image.
The error field has two parts:
• Upper 16 bits: Major error code.
• Lower 16 bits: Minor error code.
Returns 0 for no failures. Refer to the
139 and Table 37
Error Reporting and Starting with version 19.3 of the Intel Quartus Prime Pro
Version Edition software, contains the following fields:
• Bits[31:16]: Source of error. The following encodings
are valid:
— 0x0000: No error
— 0x0ACF: Application firmware reported an error
— 0x0DCF: Decision firmware reported an error
• Bits[15:0]: RSU interface version. The following
encodes are valid:
— 0x0000: Pre 19.3 release
— 0x0001: 19.3 release
Error location Stores the error location of the failing image. Returns 0
for no errors.
Error details Stores the error details for the failing image. Returns 0 if
there are no errors.
4. Remote System Update (RSU)
UG-20205 | 2019.10.09
Table 36 on page
on page 140 for more information.
continued...
Send Feedback