Intel Agilex Configuration User Manual page 135

4. Remote System Update (RSU)
UG-20205 | 2019.10.09
Command Code
(Hex)
4
CONFIG_STATUS
(9)
This number does not include the command and response header.
Send Feedback
Command Response
(9) (9)
Length Length
0 6 Reports the status of the last reconfiguration. You can use this command to check the
configuration status during and after configuration. The response contains the following
information:
Word
0
1
2
3
4
5
Description
Summary Description
State Describes the most recent configuration related error.
Returns 0 when there are no configuration errors.
The error field h
• Upper 16 bits: Major error code.
• Lower 16 bits: Minor error code.
Refer to the Table 36
140 for more information.
Version The version of the RSU data structure.
Pin status •
Bit [31]: Current
•
Bit [30]: Detected
• Bit [29:3]: Reserved
•
Bit [2:0]: The
Soft function status Contains the value of each of the soft functions, even if
you have not assigned the function to an SDM pin.
• Bit [31:6]: Reserved
•
Bit [5]:
HPS_WARMRESET
• Bit [4]:
HPS_COLDRESET
•
Bit [3]:
SEU_ERROR
• Bit [2]:
CVP_DONE
•
Bit [1]:
INIT_DONE
• Bit [0]:
CONF_DONE
Error location Contains the error location. Returns 0 if there are no
errors.
Error details Contains the error details. Returns 0 if there are no
errors.
as 2 fields:
CONFIG_STATUS
on page 139 and Table 37 on page
output value (active low)
nSTATUS
input value (active low)
nCONFIG
value at power up
MSEL
continued...
Intel ® Agilex ™ Configuration User Guide
135