Table of Contents
Advertisement
2.3.2
Rear of the SC-PRO
12
11
10
9
N°
Part
1
Grid roller marks
Conveyor roll support brackets
2
3
Conveyor roll guiding flanges
4
Conveyor roll
5
Conveyer roll brake
6
Serial interface connector
7
USB interface connector
8
Power cable connector
9
Fuse cover
Power switch
10
11
Network interface connector
12
Tool storage place
1
8
7
6
Function
To mark the position of the grid rollers.
The pressure rollers should always be positioned on top of a grid
roller, if not, it will be impossible to start cutting.
To support the conveyor rolls. Multiple stands possible for the
conveyor rolls.
To keep the loaded roll media in its position.
To support and roll off the load media roll.
To prevent that the loaded media keeps unwinding.
To connect the serial interface cable.
To connect the USB cable.
To connect the power cable.
To easily access the two fuses.
To power ON/OFF the cutter.
To connect the network cable.
To store the pens and knifes.
User's Guide SC-PRO Cutting Plotter
4
5
18
CHAPTER 2 : PRODUCT OVERVIEW
2
3
AP-75280 – Rev. 1.1
Advertisement
Table of Contents
