Register Addresses For Accessing The Control Registers - Texas Instruments TMS320C6000 Series Reference Manual

Table 3–16. Register Addresses for Accessing the Control Registers
Execution
Pipeline
Move Between the Control File and the Register File
Register
Abbreviation Name
AMR Addressing mode register
CSR Control status register
IFR Interrupt flag register
ISR Interrupt set register
ICR Interrupt clear register
IER Interrupt enable register
ISTP Interrupt service table pointer
IRP Interrupt return pointer
NRP Nonmaskable interrupt return pointer
PCE1 Program counter, E1 phase
{
FADCR Floating-point adder configuration
{
FAUCR Floating-point auxiliary configuration
{
FMCR Floating-point multiplier configuration
Note: R = Readable by the MVC instruction
W = Writeable by the MVC instruction
{ TMSC320C67x only
if (cond) src dst
else nop
Note:
The MVC instruction executes only on the B side (.S2).
Pipeline
Stage E1
Read src2
Written dst
Unit in use .S2
TMS320C62x/C67x Fixed-Point Instruction Set
MVC
Register
Read/ Write
Address
00000 R, W
00001 R, W
00010 R
00010 W
00011 W
00100 R, W
00101 R, W
00110 R, W
00111 R, W
10000 R
10010 R, W
10011 R, W
10100 R, W
3-87