GAL GALaxy eHydro Manual page 94

Section 5 – LCD Interface
GALaxy eHydro Elevator Controller
Reset Debug Variables: The debug variables are set by a software engineer to aid in debugging a
software problem. Some problems are especially difficult to catch because they occur infrequently or at
seemingly random times. The debug variables are displayed in the detailed Elevator Status Menu so
that a mechanic can view the variable and report back to the software engineer. The reset debug
variables menu allows the mechanic to reset the variables to zero to aid in debugging.
SD Card Read/Write Data: This menu is explained in detail in the next section.
SD Card Status: This is the Secured Digital Card Status showing if the card has been initialized
(Init=1), if it is standard or High Capacity (HC=1), and if it can operate at an acceptable voltage level
(VStat=1).
5.2.9.1 SD Card Rear/Write Data
This menu item allows the user to read and write controller data to and from the SD Card.
Figure 5-28:
5-30